Any suggestions on a better material or technique to make this exoskeleton in a final form than these two sketch models I started ?

Translucent concrete exoskeleton, glass interior structure?

Portfolio Handbook

LINK: portfoliohandbook

Oops.This has no bearing on B1 studio.

My iPhone will not let me back out of posting this.Although sometimes it does feel like I'm carrying a large tree on my back. I'm just saying.

Kind of behind but this is what I came up with

I am thinking of the overhang of this building as a way to receive the ferry.This building does not suggest the movement I am looking for.

1/32 scale

Ok guys so I figured out how to convert the plan to 1/32. If printing out from AutoCAD doesn't work, I suggest going to staples and having them do it. The way I do it is by opening the AutoCAD file from the BRA website and I make sure it's in decimal format. Then I just make a straight line that is 32 units, this is a reference line. I erased all of the other parts that I don't need for the plan and then I typed in the command: jpgout and then selected all of the parts I need.

After its a jpg, I printed it out at staples and I measured the line that represented 32 units. Usually it isn't 1 inch, but you can find out how much to enlarge it by doing proportions. An example is if the reference line is 13/16 of an inch, then you do the proportion 13/16 (x) = 1 or 16/16. Then solve for x. In this example x is 1.23 which is 123% that it needs to be enlarged. After its done, it should measure to 1 inch.

Cultural Center -Bjarke Ingels Group

Skenderbeu Square, Tirana Albania

Surgance

The motion of a wave hitting a wall , together with boundaries are represented in this model.This space will serve as the space for the complete program.However the Hubway station is located nearby.

purple to the right=gallery

purple to the left=phys. activity, smaller volumes on back wall = classrooms

orange=bikes

red(back to front, left to right)=food,bathroom,waiting,ticket

Almost Done

Site Model

This is the site model so far.Feel free to help work on it tomorrow at 4 before class.

who has the model?can you post some pics? We should probably meet again and get everything all set for class. let me know whats up. i also need some measurements

I can't seem to measure the height of the bridge in AutoCad. It's coming out way too small. Does anyone have any ideas?